Futon Hardware

Click / Click Metal Futon Hinges- This item is a Pair of Quality Metal Futon Hinges. These hinges have 2 positions, Couch, and Bed. The difference between these hinges and the Standard Hinges is that they operate from the front. When you lift the seat the hinges click and then release. When the frame is in a bed, you lift the seat and it clicks and locks, and then you tip the seat down, and the back comes up at the same time. They are also known as Futon Transmissions and are used on Metal Futon Frames or Futon Frames with Wooden Arms and a Metal Seat and Back Deck. You can also order a standard set of hardware for a metal frame. Although there is no guarantee that these hinges or hardware will work for your frame, they are very common and work in most cases.

Click for Terms for Purchasing Hardware

Dimensions

A to B = length of the bottom of one hinge is 13.5 " C to D = length from the center of each hole that attaches the hinge to the arms of the frame is 11.5" E to F = distance between the 2 holes in the top of the hinge which attach to the Seat or Back is 2 3/8" G to H - Distance between each set of 2 holes which attach the Seat or Back is 7" I to J = Overall length of the top surface which the seat and back attach to is 12 5/8"

Note: Sizes above are not measured with a Micrometer and could be off by a little. They are not exact but are pretty darn close.